Split System Installation Ashwood

Split System Installation in Ashwood

There’s nothing better than arriving home on a hot day of 40 degrees and flipping on your split-system air-conditioning and within a matter of minutes the house and your family are cool.

Split system air-conditioning provides this versatility, which makes them tough to beat. But , just like all heaters or coolers that are required to run at their peak they must be serviced and maintained to the highest standard by qualified experts. Melbourne Ducted Heating Repairs offers experienced technicians who know your split system air-conditioners inside and out. They specialize in all models and models of these units offering you assurance that we will finish the job to professional standards.

We offer a variety of services, which include the following:

• Split System Installation Ashwood
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling is licensed and qualified to handle all kinds of work. If you’re in search of split system installation Ashwood services then contact Local Heating and Cooling Professionals Ashwood today and talk with one of our friendly team members.

How Do Split Systems Operate?

Systems for split air conditioners earn the name because of one half of that system (condenser) located outside the house , while the other part (fan coil) is installed inside. When cooling, the warm air from inside the room is drawn in via the fan coil, and then taken out, resulting into cool air flowing back into the home. Reverse cycle allows heating pumps to operate in reverse, providing heating in cold weather.

The split system of air conditioning are installed to specific rooms, areas or multiple rooms joined by copper piping with an outside unit (condenser). Systems with multi-head splits can be set up in up to nine rooms, with just one outdoor unit and allowing for the control of temperature for each room.

What Are The Running Costs For Split Systems?

One of the top brands to use for Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating during the summer and winter seasons and the annual running costs will be $272.34.

Reducing split system Running Costs

It’s not hard to cut down on your operating costs by using a Split System. Based on the model you purchaseand its star rating will determine how much you can save annually. But looking beyond the initial price to how you utilize the Split System can help as well.

Guide to Using A Split System

• Set the thermostat between 24C and 26C to allow for cooling. Each degree less in summer will raise the cost of running by about 10%..
• Use the economy setting when your split has one and regularly service your air cooling system.
• Keep the sun’s heat out by closing curtains and external blinds during the day. Close windows and doors to areas being cooled when it is split operating.
• If the split system is turned off and the cooler is outside, open doors along with windows, allowing cool air circulate.
• Insulate your property to help keep heat out in summer and inside during winter.
• Dress according to the weather.

Why Select Split Systems?

The wall mounted air conditioning system is among the most commonly used residential air conditioning system since they are inexpensive and easy to maintain.

Inverter Technology

Inverter technology is your best option for greater comfort throughout all seasons since it ensures the temperature at a constant level, reduces costs (less consumption of energy) and produces a lesser amount of noise when used. This is achieved through control of the compressor’s rotation speed more precisely.

Affordable

Wall mounted Split AC systems are the most economical option for a single room apartment, small home or even a studio as they are relatively cheap to buy (depending on how many indoor units you’ll need) and there is no duct work required.

Independent Temperature Control

Each indoor unit has the ability to regulate the space it is installed within, and each space could have various temperature.

Air Quality

Many HVAC systems that are split have air filters and humidity control mechanisms that regulate the amount of dust and humidity inside the room. This gives sensitive customers (children and elderly, asthmatic or allergic consumers) an ease of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to connect to a single outdoor condenser which provides the comfort of having the ideal Air conditioner (in terms of physical and output constraints) for a specific room.

Split System FAQ

Are split systems the same thing as one would expect from an air conditioner?

Sure, Split System is an air conditioning system. There are various kinds of air conditioning systems. This which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each system operates with refrigerant and electricity under the same principle but they are different in terms of installation.

How long does it take to install a split-system air conditioner?

Generally speaking the typical split-system air conditioner installation will take 3-6 hours. However, the exact amount of time can vary based on a variety of factors, such as below;

• Dimensions and position of both outdoor and indoor unit
• Copper pipes that are routed between outdoor and indoor units
• Electrical connections from the main switchboard to the A/C unit.

More Split System FAQ's

Should I replace or repair the air conditioning unit in my home?

In most situation in the event that your air conditioner is over > 10 years and you notice obvious issues with your AC, there is a good chance that it could be cheaper to replace then repair.

To assist you in making the best decision, it is best to contact the experts at ComfyHome for an honest opinion on the condition of your AC.

What size of split system air conditioner will I require?

A common measurements ratio is multiple the area of the room by a ratio of 0.15 to obtain the required power of the device in kilowatts.

For a room area that is 40 sqm, you’ll have a Split system air conditioning unit of 6 kW. An air conditioning unit of 2.5kW is ideal for rooms with 10-20 square meters. areas.

However, the size of the Split system air conditioning required can be dependent on other factors such as the insulation in the room, the number of occupants and residents’ location.

For a precise assessment of the necessary Split dimension, we suggest that you call us for a more detailed analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general an air conditioner is built to last 10-20 years in the an average. But this depends on a lot of variables, including the model of the AC and the quality of the installation, the routine maintenance history etc…

It is vital to check the maintenance of your Split System Air Conditioner regularly to prolong lifetime and enhance effectiveness.

How often should I wash my air conditioner’s filter?

In accordance with Daikin Australia, it is strongly suggested that you should clean your air conditioning filters every 2 weeks to increase the efficiency of your system and possibly reduce your energy usage by 5%-15 15%.

Ashwood Gas Heating Services

• Gas Heating Service Ashwood
• Ducted Gas Heating Servicing & Repair Ashwood
• Gas Hot Water System Installation & Repairs Ashwood
• Vulcan Ducted Gas Heating Servicing & Repair Ashwood
• Gas Appliance Servicing & Repair Ashwood
• Evaporative Cooling Repair Ashwood
• Gas Heating Repairs Ashwood
• Carbon Monoxide Testing Ashwood
• Brivis Ducted Gas Heating Servicing & Repair Ashwood
• Gas Heating Installation Ashwood
• Gas Log Fire Service & Repairs Ashwood
• Gas Heating Ashwood
• Ashwood
• Gas Space Heater Repair Ashwood
• Braemar Ducted Gas Heating Servicing & Repair Ashwood

What Types of Systems We Service & Repair

Each type and brand of heating requires its specific operation and maintenance needs Our skilled technicians have the insight and experience to offer the best service to all systems of heating, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in heating repairs and maintenance with a focus on all models and brands of heating equipment. We pride ourselves on a fast response time and dedication to efficiency, excellence and reliability.

We are able to service and maintain the majority of important brands of heating units and systems that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Excellent Reputation & Reviews
• We’re Personable & Friendly
• Highly Experienced and Licenced Team
• Get a Free Quote and No Obligation

Our Promise To You

At Melbourne Ducted Heating Repairs we understand the discomfort of not having hot water. It’s a situation we don’t think anyone should suffer through. This is why we place such a high priority for hot water emergencies. All of our experienced plumbers are trustworthy and friendly, without a doubt we can assist you in any situation.

We pride ourselves on our customer service and it is our belief that the tiny things are the most important.

We are proud of our excellent customer service. here’s why our customers are so happy with us:

• We always arrive when we declare that we will.
• Our techs will give you a the number to call them when they are thirty minutes away.
• Price upfront, competitive and professional advice before we begin the work.
• Always getting our hands clean after our own mess.

The staff at Melbourne Ducted Heating Repairs offer emergency and maintenance services in plumbing, heating, and electrical. If you have some questions about our services and the products we offer.