Split System Installation Burwood

Split System Installation in Burwood

There’s nothing better than coming home from a scorching day of 40 degrees and switching on your split system air conditioning, and in a matter of seconds, the house and your family is cool.

Split system air conditioning offers this versatility, making them hard to beat. Like all heaters and coolers that are required to run to their maximum they should be maintained and maintained at a high level by skilled professionals. Melbourne Ducted Heating Repairs offers experienced technicians who are familiar with split system air-conditioners in and out. They specialize in all brands and models of these units giving you the peace of mind that we can get the job done in a professional manner.

We provide a variety of services that include the following:

• Split System Installation Burwood
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are fully qualified and licensed for all sorts of tasks. If you’re looking for split system installation Burwood services then contact Local Heating and Cooling Professionals Burwood today and talk with one of our helpful team members.

How Do Split Systems Work?

Systems for split air conditioners get their name because of half this system (condenser) is located outside of the house while the other half (fan coil) is inside. When it cools, hot air that is inside the room is brought in through the fan coil before being is then removed, which results in cool air being recirculated back into the house. The reverse cycle permits the heat pump to operate in reverse to provide heating during cold days.

Split air conditioning systems can be installed to specific rooms, zones or rooms joined by copper piping into an outdoor unit (condenser). Split air conditioners with multiple heads can be used in as many as nine rooms using just one outdoor unit as well as allowing the control of temperature for each room.

What Are The Ongoing Costs For Split Systems?

One of the brands we recommend for Split Systems is Mitsubishi Electric. If you are looking for an Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular cooling and heating during the winter and summer periods, the annual running cost would be $272.34.

Reducing Costs of Split Systems Operating Costs

It’s not difficult to cut down on your operating costs by using a Split System. Depending on the model you buy, as well as its star rating will determine how much you can save annually. It is important to look beyond the initial cost to the way you make use of Your Split System can help as well.

Tips For Operating A Split System

• Set the thermostat to 24C and 26C to cool. Each degree less in summer will increase your running costs by about 10%..
• Use the economy setting in the event that your split system is equipped with one and regularly service your air cooling system.
• Make sure that the sun’s heat is kept out by closing curtains as well as external blinds during the daytime. Close the doors and windows of areas that are cooling when your split systems are on.
• When the split system is shut off and the cooler outside, open the doors or windows and let the cool air flow in.
• Insulate your property to help keep the warm summer days out and cool in the winter months.
• Dress according to the weather.

Why Choose Split Systems?

Air conditioning units mounted in wall are among the most commonly used residential air conditioning system because they’re affordable and easily to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through the year since it keeps the temperature constant, cuts costs (less consumption of energy) and produces a lesser amount of noise when it is used. This is achieved by control of the compressor’s rotation speed more precisely.

Affordable

Wall mounted divided AC system are best cost-effective option for a single room or apartment since they are inexpensive to buy (depending on the amount of indoor units you’ll need) and do not require requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to control the room that it is located in, so each room is able to have various temperature.

Air Quality

Many split air conditioning systems include air filtering and humidity control features which control the amount dust and humidity inside the space. This can provide those with sensitive conditions (children older, asthmatic, or allergic users) peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to a single outdoor condenser that in turn provides you with the convenience of having the ideal Air conditioner (in terms of physical and output constraints) for a particular room.

Split System FAQ

Is a split system the same as the air conditioning?

Yes, Split System includes an air-conditioning unit. But, the different kinds of air conditioning systems. These which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All of them operate by using refrigerant and electricity. They all operate on the same principle but they are different in terms.

How long will it take to install a split system air conditioner?

In general for a single split system air conditioning installation should be completed in 3-6 hours. However, the exact amount of time may vary based on a variety of factors, such as below:

• Location and size of both outdoor and indoor unit
• The routing of copper pipes between the outdoor unit and indoor unit
• Electrical connections from main switchboard to the A/C unit.

More Split System FAQ's

Should I replace or repair my cooling system?

In the majority of cases, if your air conditioner is over > 10 years and there are evident issues with the A/C, there is a good chance that it’s cheaper to replace rather than fix.

To assist you in making the right choice for your needs, consult with the staff at ComfyHome to provide you with an honest evaluation of the condition of your air conditioner.

What size split system air conditioning do I need?

A common measurements ratio is multiple the space by a factor of 0.15 to get the needed power of the unit in Kilowatts.

For a space of 40 square meters, you will have a Split system air conditioning unit with 6 kW. A cooling unit of 2.5kW is the ideal size for 10 -20 sqm room spaces.

However, the size of the Split system’s air conditioning is also affected by other variables like the room insulation, number of occupants and residents’ location.

To get an accurate estimate of the required Split Unit size please call us for a more detailed analysis.

More Split System FAQ's

How long does an air conditioner split system last?

In general air conditioners are built to last from 10-20 years in the average. However, it is contingent on a variety of factors such as the manufacturer of the air conditioner it is installed on, the quality of its installation, regular service history, and more…

It is important to service your split system air conditioner on a regular basis to extend its life and increase effectiveness.

When should I clean my air conditioner air filter?

In accordance with Daikin Australia, it is strongly recommended that you clean your air conditioning filters every two weeks to improve the efficiency of the system and reduce your energy usage by 5 to 15%.

Burwood Gas Heating Services

• Gas Appliance Servicing & Repair Burwood
• Braemar Ducted Gas Heating Servicing & Repair Burwood
• Burwood
• Gas Log Fire Service & Repairs Burwood
• Brivis Ducted Gas Heating Servicing & Repair Burwood
• Evaporative Cooling Repair Burwood
• Gas Hot Water System Installation & Repairs Burwood
• Gas Heating Repairs Burwood
• Gas Heating Installation Burwood
• Ducted Gas Heating Servicing & Repair Burwood
• Gas Heating Burwood
• Gas Space Heater Repair Burwood
• Carbon Monoxide Testing Burwood
• Vulcan Ducted Gas Heating Servicing & Repair Burwood
• Gas Heating Service Burwood

What Types of Systems We Service & Repair

Each model and brand of heating system has its own operation and maintenance Our skilled technicians have the insight and know how to provide first rate services across all kinds of heaters, including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in heating repairs and maintenance that specialize in all kinds and brands of heating systems. We take pride in a quick response time and commitment to efficiency, excellence and reliability.

We service and maintain the top brands of heating units and systems that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Professional Quality Workmanship Assurance
• Excellent Reviews & Reputation
• We’re friendly, personable and polite.
• Highly Experienced and Licenced Team
• Request a Quote with No obligation

Our Promise To You

We at Melbourne Ducted Heating Repairs we understand the difficulty of not having hot water, and it’s something that we would never want anyone to be forced to endure. This is the reason we place an emphasis on emergencies with hot water. Our experienced plumbers are trustworthy and friendly and without doubt, we can assist you in all situations.

We pride ourselves on the quality of our customer service. It is our belief that the tiny things are the most important.

We pride ourselves on our outstanding customer service. and here’s the reason our customers love us:

• We always show up when say we will.
• Our staff will give you a call when they are 30 minutes away.
• Pricing upfront competitive and guidance prior to the start of the project.
• Always cleaning up after us.

At Melbourne Ducted Heating Repairs offer emergency and maintenance services for plumbing, heating, and electrical. If you have any questions regarding our services or what we can provide.