Split System Installation Port Melbourne

Split System Installation in Port Melbourne

There’s nothing more enjoyable than coming home to a day of 40 degrees and activating your split system air conditioning and in just a couple of minutes , your home and your family is cool.

Split system air-conditioning offers such the ability to be used in a variety of ways, making them difficult to beat. But like all heaters and coolers to make sure they’re running to their maximum it is essential to have them serviced and maintained at a high level by experienced professionals. Melbourne Ducted Heating Repairs offers experienced technicians who know your split system air conditioners in and out. They are experts in all makes and models of these units offering you assurance that they are able to complete the task in a professional manner.

We offer a wide range of different Split System Installation services which include the following:

• Split System Installation Port Melbourne
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are fully qualified and licensed to handle all kinds of tasks. If you’re searching for split system installation Port Melbourne services then contact Local Heating and Cooling Professionals Port Melbourne today and talk with one of our helpful team members.

How Do Split Systems Work?

Air conditioning splits get their name because half of this system (condenser) located outside the house while the other half (fan coil) is installed inside. In cooling, hot air that is inside the room is brought in through the fan coil and removed, resulting in cooling air returning to the home. In reverse mode, it allows the heat pump to run in reverse, providing heating on cold winter days.

The split system of air conditioning can be installed to specific rooms, areas or even multiple rooms linked by copper pipe to an outdoor unit (condenser). Multiple-headed split-air conditioning units can be set up for at least nine rooms and just one outdoor unit and allow for separate temperature control for each room.

What Are The Running Costs For Split Systems?

One of the top brands to use for Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular cooling and heating during the summer and winter months and the annual running costs would be $272.34.

Lowering Costs of Split Systems Operating Costs

It’s not difficult to cut down on your operating costs by using the Split System. The model you purchase, and the star rating, you will be able to determine how much you’ll save per year. However looking beyond the initial cost to how you make use of your Split System can help as well.

Guide to Using A Split System

• Set the thermostat to 24C and 26, which is the ideal temperature for cooling. Any degree lower than that will increase your running costs by 10%..
• Use the economy setting when your split has one and regularly service your air cooling system.
• Keep the sun’s heat away by closing curtains and external blinds during the day. Close the doors and windows of areas being cooled when it is split in operation.
• If the split system is switched off , and the cooler outside, it is recommended to open the doors or windows and let the cool air flow in.
• Insulate your house to block heat out in summer and in the winter months.
• Dress appropriately for the weather.

Why Select A Split System?

The wall mounted air conditioning system is the most frequently owned residential air conditioning system because they are cost-effective and simple to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through the year because it maintains an even temperature, helps save costs (less energy use) and generates less sound when it is utilized. This is achieved by controlling the compressor rotation speed more precisely.

Affordable

Wall mounted split AC models are best cost-effective option for a single room or apartment as they are comparatively inexpensive to purchase (depending on how many indoor units you need) and do not require necessary duct work.

Independent Temperature Control

Each indoor unit has the ability to control the area it is installed in, so each room could have various temperature.

Air Quality

A lot of AC splits include air filtering and humidity control functions that regulate the amount of dust and humidity in a room. This provides those with sensitive skin (children older, asthmatic, or allergic consumers) the peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser, which provides satisfaction of having the best Air conditioner (in terms of output and physical restrictions) for a particular room.

Split System FAQ

Are split systems the same as the air conditioning?

It is true that Split System can be described as an air conditioner system. However, there are many kinds of air conditioning systems. This that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

Each system operates on electricity & refrigerant under the same principle, but are different in terms.

How long will it take to set up a split system air conditioner?

Generally speaking, a single split air conditioning system installation will take 3-6 hours. However, the exact amount of time could vary based upon a number of variables, including below:

• The size and location of both outdoor and indoor unit
• Copper pipes that are routed between indoor and outdoor unit
• Electrical connections from the main switchboard to the A/C unit

More Split System FAQ's

Should I replace or repair my air conditioner?

In the majority cases when your air conditioner is more than 10 years old and you notice noticeable issues with your A/C there’s a great possibility that it will be cheaper to replace then repair.

To assist you in making the best decision, it is best to talk to the experts at ComfyHome to provide you with an honest and accurate assessment of the state of your air conditioner.

What size split system air conditioning will I require?

A typical measurement ratio is to multiply the size of the room by a factor of 0.15 to obtain the required power of the unit in kilowatt.

For a space of 40 square metres, you’ll require a split air conditioning system of 6 kW. A cooling unit of 2.5kW is ideal for 10-20 sqm rooms areas.

However, the size of the Split system’s air conditioning can also be dependent on other factors such as how well the insulation is in place, the number of occupants and residents’ location.

To make an accurate determination of the needed Split Unit size we recommend you contact us for a detailed analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general the air conditioner is constructed to last for 10-20 years in the average. But this depends on a lot of factors such as the manufacturer of the air conditioner as well as the quality of the installation, routine service history and so on…

It is important to service the Split System air conditioner regularly to extend its life and increase efficiency.

What is the best frequency to wash the air conditioner’s air filter?

Based on Daikin Australia, it is strongly recommended that you wash your air conditioner’s filters every two weeks to improve the efficiency of the system and reduce your energy consumption by 5%-15 15%.

Port Melbourne Gas Heating Services

• Gas Heating Port Melbourne
• Gas Log Fire Service & Repairs Port Melbourne
• Gas Space Heater Repair Port Melbourne
• Brivis Ducted Gas Heating Servicing & Repair Port Melbourne
• Ducted Gas Heating Servicing & Repair Port Melbourne
• Vulcan Ducted Gas Heating Servicing & Repair Port Melbourne
• Gas Appliance Servicing & Repair Port Melbourne
• Braemar Ducted Gas Heating Servicing & Repair Port Melbourne
• Port Melbourne
• Gas Hot Water System Installation & Repairs Port Melbourne
• Evaporative Cooling Repair Port Melbourne
• Gas Heating Service Port Melbourne
• Gas Heating Installation Port Melbourne
• Gas Heating Repairs Port Melbourne
• Carbon Monoxide Testing Port Melbourne

What Types of Systems We Service & Repair

Every brand and type of heating requires its own operation and maintenance Our experienced technicians have the knowledge and know how to provide first rate services on all types of heating equipment for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in heating repairs and maintenance and specialize in all types and brands of heating systems. We are proud of our quick response time and commitment to excellence, efficiency and reliability.

We service and maintain the majority of top brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reputation & Reviews
• We’re friendly, personable and polite.
• Highly Experienced and Licenced Team
• Request a Quote with No obligation

Our Promise To You

We at Melbourne Ducted Heating Repairs we understand the frustration of not having hot water. It’s a situation we don’t think anyone should suffer through. That’s why we give such a high priority on emergencies involving hot water. Our experienced plumbers are friendly and trustworthy Without a doubt, we will be able to help you in any circumstance.

We are proud of our service to customers and it is our conviction that the minor things matter most.

We take pride in our great customer service, Here’s why our clients love us:

• We always show up when tell you we will.
• Our technicians will give you an appointment when they are thirty minutes away.
• Upfront competitive pricing and advice before we even begin the job.
• Always getting our hands clean after our own mess.

The staff at Melbourne Ducted Heating Repairs offer emergency and maintenance services in electrical, plumbing and heating. If at any time you are unsure about our services, and the services we provide, we are here to help.