Split System Installation Glen Iris

Split System Install in Glen Iris

There’s nothing better than arriving home to a day of 40 degrees and flipping on your split-system air conditioning and in a matter of minutes , your home and your family will be cool.

Split system air conditioning provides such versatility, which makes them tough to beat. But , just like all heaters or coolers to keep them running to their maximum they must be maintained and serviced at a high level by qualified professionals. Melbourne Ducted Heating Repairs offers experienced technicians who know your split system air-conditioners from top to bottom. They specialize in all brands and models of these units providing you with assurance that we can get the job done in a professional manner.

We offer a wide range of services that comprise the following:

• Split System Installation Glen Iris
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are fully qualified and licensed to complete all types of tasks. If you are looking for split system installation Glen Iris services then contact Local Heating and Cooling Professionals Glen Iris today and talk with one of our helpful team members.

How Do Split Systems Function?

Split air conditioning systems get their name because of half it (condenser) being located outside the house while the other part (fan coil) is installed inside. In cooling, hot air that is inside the room is drawn in by the fan coil, and then removed, resulting in cool air recirculating back into the house. While reverse cycle allows for that the heating system to run in reverse to provide heat on cold winter days.

The split system of air conditioning are installed in individual rooms, zones or rooms linked by copper pipe to an outdoor unit (condenser). Systems with multi-head splits can be set up for more than nine rooms, with only one outdoor unit as well as allowing individual temperature control of each room.

What Are The Ongoing Costs With Split Systems?

One of our recommended brands that we recommend for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular heating & cooling during the summer and winter time, the annual running cost would be measured at $272.34.

Reducing split system Operating Costs

It’s not hard to cut down on your operating costs by using a Split System. Depending on the model that you purchaseand its star rating will determine just how much you will save each year. But looking beyond the initial cost to how you will use your Split System can help as well.

Guide to Using Split Systems

• Set the thermostat to 24C and 26, which is the ideal temperature for cooling. Any degree lower than that increases the running cost by approximately 10%..
• Use the economy setting If your split system comes with one and regularly service your air conditioning.
• Make sure that the sun’s heat is kept out by closing curtains and external blinds during the daytime. Close windows and doors to areas being cooled when the split system is running.
• When the split system is turned off and the cooler is outside, open the doors or windows and let cool air flow in.
• Insulate your property to help keep heat out in summer and in during winter.
• Dress appropriately for the weather.

Why Choose Split Systems?

Air conditioning units mounted in wall are the most commonly used residential air conditioning system since they are inexpensive and easy to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through the year because it maintains an even temperature, helps save costs (less energy use) and generates less sound when it is employed. This is achieved through controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted divided AC models are most cost-effective option for a single room or apartment as they are relatively cheap to purchase (depending on the amount of indoor units you will require) and there is no requirement for ductwork.

Independent Temperature Control

Each indoor unit is able to regulate the space it is located in, so each room may have different temperature.

Air Quality

Many Split air conditioners feature air filters and humidity control mechanisms that control the amount of dust and humidity inside the space. This gives sensitive customers (children older, asthmatic, or allergic customers) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to a single outdoor condenser which provides the comfort of having the ideal AC (in terms of output and physical restrictions) for a specific room.

Split System FAQ

Is a split system the same as an air conditioner?

Absolutely, Split System is an air conditioning system. There are various kinds of air conditioning systems. These include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All these systems operate with refrigerant and electricity under the same principle but they are different in terms.

How long does it take to set up a split system air conditioner?

In general, a single split-system air conditioner installation is expected to last between 3 and 6 hours. The exact length of time will depend on a variety of factors, such as below;

• Location and size of both indoor and outdoor unit
• The routing of copper pipes between indoor and outdoor unit
• Electrical connections from main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair my cooling system?

In the majority of situations, if your air conditioner is more than 10 years of age and has evident issues with the A/C there’s a good chance that it’s cheaper to replace then repair.

To assist you in making the right choice To make the right choice, consult with the staff at ComfyHome to get an honest and accurate assessment of the state of your air conditioner.

What size split system air conditioning will I require?

A typical measurements ratio is multiply the space by a ratio of 0.15 to obtain the required power of the device in kilowatts.

For a room with a size of 40 square metres, you’ll have a Split air conditioning system of 6 kW. A cooling unit of 2.5kW is suitable for 10-20 square meter room areas.

The size of the Split system’s required air conditioning can also be affected by other factors like the insulation of the room, the number of occupants and residents’ location.

For a precise assessment of the needed Split units size please contact us for a detailed analysis.

More Split System FAQ's

How long does a split system air conditioner last?

In general the air conditioner is designed to last between 10 and 20 years on an average. However, this is contingent upon a myriad of things like the model of the AC it is installed on, the quality of its installation, routine maintenance history etc…

It is important to service your Split System Air Conditioner often to extend its life and increase effectiveness.

What is the best frequency to clean the air conditioner’s air filter?

As per Daikin Australia, it is strongly recommended that you take care to clean your air conditioning filter every 2 weeks to increase the system’s efficiency and potentially reduce your energy usage by 5 to 15 percentage.

Glen Iris Gas Heating Services

• Gas Heating Glen Iris
• Gas Space Heater Repair Glen Iris
• Gas Hot Water System Installation & Repairs Glen Iris
• Glen Iris
• Brivis Ducted Gas Heating Servicing & Repair Glen Iris
• Gas Heating Repairs Glen Iris
• Ducted Gas Heating Servicing & Repair Glen Iris
• Vulcan Ducted Gas Heating Servicing & Repair Glen Iris
• Gas Heating Installation Glen Iris
• Gas Log Fire Service & Repairs Glen Iris
• Evaporative Cooling Repair Glen Iris
• Carbon Monoxide Testing Glen Iris
• Gas Appliance Servicing & Repair Glen Iris
• Gas Heating Service Glen Iris
• Braemar Ducted Gas Heating Servicing & Repair Glen Iris

What Types of Systems We Service & Repair

Each brand and style of heating comes with its individual operation and maintenance requirements Our experienced technicians have the insight and know how to provide first rate services to all systems of heating, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in heating repairs and maintenance, specialising in all styles and models of heating systems. We take pride in a fast response time and dedication to quality, efficiency and reliability.

We service and maintain all top brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Great Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reviews & Reputation
• We’re friendly and personable.
• Highly Experienced and Licenced Team
• Get a Free Quote and No obligation

Our Promise To You

At Melbourne Ducted Heating Repairs we understand the frustration of not having hot water. This is something we don’t think anyone should suffer through. This is why we place such a high priority on emergencies with hot water. Our experienced plumbers are reliable and friendly Without a doubt, we will be able to help you in any situation.

We take pride in our customer service and it is our firm belief that the minor things matter most.

We pride ourselves on our exceptional customer service. here’s why our customers love us:

• We will always be there when we promise to be there.
• Our staff will give you their number when they’re 30 minutes away.
• Competitive pricing upfront and expert advice prior to the start of the project.
• Always cleaning up after ourselves.

At Melbourne Ducted Heating Repairs offer emergency and maintenance services in plumbing, heating, and electrical. If at any time you have any questions regarding our services and what we can offer, please contact us.