Split System Installation Kew

Split System Installation in Kew

There’s nothing better than arriving home from a scorching 40 degree day flipping on your split-system air conditioning and in a matter of minutes your house and your family will be cool.

Split system air conditioning provides such versatility, which makes them tough to beat. But like all heaters and coolers to make sure they’re running at their best, they need to be serviced and maintained in a professional manner by qualified professionals. Melbourne Ducted Heating Repairs offers experienced technicians who are familiar with split system air-conditioners in and out. They specialize in all models and models providing you with peace of mind that we will finish the job to a professional standard.

We provide a variety of different Split System Installation services which include the following:

• Split System Installation Kew
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling is licensed and qualified to handle all kinds of work. If you’re looking for [keywords lower] Kew services then contact Local Heating and Cooling Professionals Kew today and talk with one of our friendly team members.

How Do Split Systems Work?

The split systems of air conditioning get their name due to half this system (condenser) is located outside of the house , while the other half (fan coil) is inside. When it cools, warm air from inside the room is taken in by the fan coil before being is then removed, which results in cool air recirculating back into the home. While reverse cycle allows for that the heating system to run in reverse to provide heating in cold weather.

Split air conditioning systems can be placed in rooms, areas or even multiple rooms joined by copper piping into an outdoor unit (condenser). Split air conditioners with multiple heads can be used for at least nine rooms using only one outdoor unit as well as allowing an individual temperature control for each room.

What Are The Running Costs With Split Systems?

One of the most recommended brands of Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating during the summer and winter time The annual operating cost would be $272.34.

Reducing Split System Operating Costs

It’s not hard to lower your running expenses by using a Split System. Depending on the model you buy, as well as its star rating will determine how you’ll save each year. However looking beyond the initial cost to the way you will use it Split System can help as well.

Guide to Using Split Systems

• Set the thermostat to 24C and 26C to cool. Any degree lower than that will increase the running costs by approximately 10%..
• Utilize the economy setting when your split has one and regularly service your air conditioning.
• Keep the sun’s heat out by closing curtains and blinds in the morning. Close all doors and windows in areas that are cooled when you have the split unit operating.
• When the split system has been switched off , and the cooler outside, you can open doors and windows to let cool air in.
• Insulate your home to keep the warm summer days out and cool inside during winter.
• Dress to suit the weather.

Why Choose Split Systems?

Wall mounted split air conditioning systems are among the most commonly owned by homeowners who own a residential air conditioning system since they are inexpensive and simple to maintain.

Inverter Technology

Inverter technology is the key to more comfort throughout all seasons since it ensures a constant temperature, saves costs (less energy use) and creates a lot less sound when it is employed. This is achieved through managing the speed of the compressor more precisely.

Affordable

Wall mounted split AC models are most budget option for a small room, apartment or small house as they are comparatively inexpensive to purchase (depending on the amount of indoor units you will require) and they don’t require requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to regulate the space it is located within, and each space is able to have distinct temperature.

Air Quality

A lot of HVAC systems that are split include air filtering and humidity control functions which control the amount dust and humidity in the space. This gives sensitive customers (children older, asthmatic, or allergic users) peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to one outdoor condenser, which gives you the comfort of having the ideal air conditioner (in terms of physical and output constraints) to a specific space.

Split System FAQ

Are split systems the same as one would expect from an air conditioner?

Yes, Split System is an air conditioning system. However, there are many kinds of air conditioning systems. This include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All these systems operate on electricity & refrigerant under the same principle but they are different in terms of installation.

How long does it take to install a split-system air conditioner?

In general the typical split-system air conditioner installation should be completed in 3-6 hours. But, the exact amount of time can vary based on a variety of factors, such as below;

• Dimensions and position of both the outdoor and indoor unit
• The route of copper pipes between the outdoor unit and the indoor unit
• Electrical connections from main switchboard up to the AC unit

More Split System FAQ's

Do I need to replace or fix the air conditioning unit in my home?

In most situation when your air conditioner is at least 10 years old and there are obvious issues with your AC there’s a good possibility that it will be cheaper to replace rather than fix.

For help in making the right decision, it is best to talk to the experts at ComfyHome to get an honest assessment on the condition of your AC.

What size of split system air conditioner do I need?

The standard measure ratio would be to multiple the area of the room by a ratio of 0.15 to obtain the required power of the device in kilowatts.

If you have a room size of 40 square metres, you’ll need a Split system air conditioning unit that is 6 kW. A unit that can cool the air at 2.5kW is suitable for 10-20 sqm rooms areas.

However, the size of the Split system air conditioning required can also be affected by other factors like the insulation of the room, the quantity of residents and’ position.

To make an accurate determination of the necessary Split dimension, we recommend you contact us for a detailed analysis.

More Split System FAQ's

How long can a split system air conditioner last?

In general, an air conditioner is constructed to last for 10-20 years in the average. However, it is contingent on a variety of things like the brand of the A/C, quality of the installation, routine maintenance history and more…

It is vital to check the maintenance of the Split System air conditioner often for a longer life span and to increase efficiency.

What is the best frequency to wash my air conditioner’s air filter?

Based on Daikin Australia, it is strongly suggested that you should take care to clean your air conditioning filter every 2 weeks to increase the efficiency of the system, and ultimately reduce your energy usage by 5%-15 percentage.

Kew Gas Heating Services

• Gas Heating Service Kew
• Brivis Ducted Gas Heating Servicing & Repair Kew
• Carbon Monoxide Testing Kew
• Vulcan Ducted Gas Heating Servicing & Repair Kew
• Gas Heating Installation Kew
• Gas Heating Repairs Kew
• Gas Hot Water System Installation & Repairs Kew
• Evaporative Cooling Repair Kew
• Gas Log Fire Service & Repairs Kew
• Braemar Ducted Gas Heating Servicing & Repair Kew
• Gas Heating Kew
• Ducted Gas Heating Servicing & Repair Kew
• Gas Appliance Servicing & Repair Kew
• Gas Space Heater Repair Kew

What Types of Systems We Service & Repair

Each model and brand of heating requires its own operation and maintenance Our experienced technicians have the knowledge and expertise to provide top-quality services across all kinds of heaters which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in heating repairs and maintenance with a focus on all models and models of heating systems. We are proud of our rapid response time as well as a commitment to efficiency, excellence and reliability.

We are able to service and maintain the majority of leading brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Competitive Prices You Can Trust
• Professional Quality Workmanship Assurance
• Excellent Reviews & Reputation
• We’re personable and friendly
• Highly Experienced and Licenced Team
• Request a Quote with No Obligation

Our Promise To You

We at Melbourne Ducted Heating Repairs we understand the discomfort of not having hot water and it’s something we don’t think anyone should have to experience. This is why we put an emphasis on emergencies with hot water. Our plumbers are courteous and reliable, without a doubt we will be able to assist you in all situations.

We take pride in our service to customers and it is our firm belief that the minor things matter most.

We take pride in our outstanding customer service. and here’s the reason our customers love us:

• We always show up when tell you we will.
• Our staff will give you an appointment when they are thirty minutes away.
• Competitive pricing upfront and expert advice before we start the job.
• Always cleaning up after ourselves.

Our company Melbourne Ducted Heating Repairs offer emergency and maintenance services in electrical, plumbing and heating. If at any time you have questions about our services and what we can provide.